How Do I Change Message Size Limits Exchange 2010/2007

 

Size limits for email messages are controlled in a variety of places in Exchange. Settings are placed globally at the transport level, on each individual send or receive connector, at each individual mailbox, and controlled at individual web applications such as EWS and OWA . Your business needs should determine if you need to change these settings and at which location(s). In order to accomplish this successfully, you must know that more restrictive settings override less restrictive settings as you flow up the chain from individual mailbox settings to SMTP connectors and finally to global transport settings.

Global Transport Settings

Get-TransportConfig displays global transport settings for all Hub and Edge Transport servers in the Exchange Organization. By default, there is a 10MB size limit on send and receive. This will override all other less restrictive message size limit settings set elsewhere.

NOTE: Exchange considers message submission to the store driver as a “send” operation. Therefore, if you are attempting to receive an email message on an SBS server from the internet that is greater than the MaxSendSize of the global transport configuration, delivery will fail.

clip_image002

Get-TransportConfig | ft MaxSendSize, MaxReceiveSize

Example:

Set-TransportConfig –MaxSendSize 20MB –MaxReceiveSize 20MB

Receive Connector Settings

Each receive connector is created with a default 10MB message size limit. A default install of SBS will contain a default receive connector (created during Exchange setup, do not remove this), an internet facing receive connector, and a receive connector for fax receipts and Sharepoint email notifications. The Windows SBS Internet Receive connector is the only one that you should ever need to adjust settings for. NOTE: If the global receive size is more restrictive, it will override this setting

clip_image004

Get-ReceiveConnector | ft name, MaxMessageSize

Example:

Set-ReceiveConnector “Windows SBS Internet Receive Servername” –MaxMessageSize 20MB

Send Connector Settings

Each send connector is created with a default 10MB message size limit. In SBS , a single send connector is created for email destined for mail hosts outside of the site. If you need to adjust the size of messages flowing out of the SBS server, then you would change it here. **If the global send size is more restrictive, it will override this setting**

clip_image006

Get-SendConnector | ft name, MaxMessageSize

Example:

Set-SendConnector “Windows SBS Internet Send Servername” –MaxMessageSize 20MB

Advertisements